West Coast Compressor is an approved Distributor and Service Center for CAS, Compressed Air Systems.

Compressed Air Systems was founded in 1980 as an industrial tool and equipment distribution company known as BS Trading. In a short period of time the owners of BS Trading Company found it could manufacture air compressors that were easier to use and operate than those that it was selling. They began by producing compressors from 3-15hp in the early 1980’s moving to larger sizes by 1990.

In the early 1990’s CAS began manufacturing our rotary screw compressors with Bauer/Rotorcomp airends out of Germany because of the reputation they have for extreme reliability. During the first part of the 2000’s CAS purchased a compressor pump manufacturing facility in Dafeng, China. By doing this, CAS was able to control the parts and pieces as well as testing being done on the reciprocating compressor pumps.

 

We source parts from all over the world for the production of our pumps. Our compressor valves components come from Sweden, our bearings and gaskets materials come from the United States and Japan. Over the years CAS has grown from production of a few hundred compressor packages per year to thousands of compressor packages per year from 1-300hp ranges. During the last thirty plus years CAS has grown exponentially due to great support from all of its distributors across the globe. CAS products are sold on every continent except Antarctica

Reciprocating

 

Basic Compressor Features:

 

  • Heavy Duty two stage solid cast iron pump

  •  Disk and spring valves

  •  Bearings on both ends of the crank shaft

  •  Needle bearings, and inserts on rods

  •  Industrial grade electric motor

  •  ASME tested powder coated steel tank

  •  2 grove B width motor pulleyn All UL electrical controls

  •  Access to compressor valves without compressor head removal

  •  Auto start stop

  •  Fully enclosed belt guard

  •  Centrifugal unloadern Heavy duty air filter

  •  Swedish steel valves

  •  Torrington needle bearings

  •  Magnetic starter mounted and wired

 

Elite CompressorFeatures

 

  •  All basic featuresn Low oil monitor

  •  Automatic tank drainn Vibration pads

  • Tank discharge ball valven Freight pre-paid in the 48 states & southern Canada

 

Rotary Screw

Basic Compressor Features

 

  • Heavy Duty two stage solid cast iron pump

  • Disk and spring valvesn Bearings on both ends of the crank shaft

  • Needle bearings, and inserts on rods

  • Industrial grade electric motorn ASME tested powder coated steel tank

  • 2 grove B width motor pulley

  • All UL electrical controlsn Access to compressor valves without compressor head removal

  • Auto start stopn Fully enclosed belt guard

  • Centrifugal unloader

  • Heavy duty air filtern Swedish steel valves

  • Torrington needle bearingsn Magnetic starter mounted and wired

 

Elite Compressor Features

 

  • All basic featuresn Low oil monitorn Automatic tank drain

  • Vibration pads n Tank discharge ball valve

  • Freight pre-paid in the 48 states & southern Canada

 

Gas and Deisel Driven

 

Basic Compressor Features:

 

  • Heavy Duty two stage solid cast iron pump

  • Disk and spring valves

  • Bearings on both ends of the crank shaft

  • Centrifugal unloadern Needle bearings, and inserts on rods

  • Industrial grade diesel engine

  • ASME tested powder coated steel tank

  • 2 grove B width drive pulley

  • Access to compressor valves without compressor head removal

  • Pilot valve continuous operationn Fully enclosed belt guard

  • Full saddle mounting feet

  • Alternator on drive engine

  • Torrington needle bearings

  • Swedish steel valves

  • Critical controls protected by compressor base platen Drive engine on left side for easy start up

  • Heavy duty air filter

 

Elite Compressor Features:

 

  • All basic features

  • Belt guard after cooler

  • On-board battery mounted and wired (No wiring to the front of the truck needed)

  • Automatic tank drain

  • Vibration pads

  • Tank discharge ball valve

  • Freight pre-paid in the 48 states & southern Canada

For more information about Air Compressors and Accessories, please call 925-454-1640 or contact us with your application requirements.
  • Facebook Classic