top of page
Nano NXC Dryer Line


The unique dry thermal mass in the nano NXC cycling refrigerated air dryer saves energy and money by utilizing dual transfer technology (DTT).   As a result, the energy saving cycling dryer is eligible for rebates in many parts of the country. The NXC also offers steady dew point performance, low pressure drop and reliable operation to ensure you have continuous, worry free, clean and dry compressed air.


NXC's unique, patented heat exchanger provides the best dew point performance, the fastest response times if demand increases suddenly and the lowest power consumption across the entire spectrum of operation.

Reliability is built in...and backed by our 2 year warranty with pre-filtration and non-corrosive piping installed


Some of the many features and benefits:

  • saves up to 80% over a traditional dryer

  • simple to use CAREL digital microprocessor features dew point display and alarms

  • standard refrigerant gauge located on side of cabinet for ease of troubleshooting

  • robust, reliable and fully adjustable timer drain standard on all models

  • environmentally friendly R134a or R407C refrigerant and non-toxic silica dry mass utilized in all models

  • easy to install and start up with no overnight precooling of thermal mass require

  • all panels can be removed to facilitate maintenance

  • fully packaged into a simple compact design, NXC will fit into the smallest spaces

Nano Compressed Air & Gas Filters
Nano carries a complete line of compressed air and gas filters.
  • Performance Validated Filters
  • Cenrifugal water separators
  • Medical sterile filters
  • Medical vacuum filters
  • Vacuum pump protection filters
  • High pressure filters
  • Mid pressure aluminum filters
  • High temperature filters
  • High capacity flanged filters
  • And OEM replacements
Nano Desiccant Dryers


The nano  desiccant air dryers are designed to remove water vapor from your compressed air, lowering the pressure dewpoint to -40 or even -100 degrees F. No liquid water or ice crystals will form even if the temperature of the compressed air falls to 40 degrees below zero!  Designed for the most demanding applications, the nano desiccant air dryers are your solution for continuous and uninterrupted clean dry air.


The advanced design combines reliable field proven components and cost effective operation with 21st century PLC controls and a digital user interface.  For clean dry air, there is no better, more  dependable, easier to use dryer available on the market today.


Reliability is built in…and backed by our 5 year warranty on inlet and purge exhaust valves.

Nano Oil Water Separators


A typical compressed air and gas system can produce thousands of gallons of condensate per year. This condensate may be as much as 99.9% pure water - so why pay thousands of dollars per year to dispose of water when you can clean it simply and effectively and pour it down the drain? The nano Sepura range of oil water separators remove the oil from the water in your condensate so you can dispose of it cleanly and safely, drastically reducing your condensate disposal costs.


The S1 is not your typical oil water separator. Its advanced design and unique environmentally friendly STERLING oil absorbing filtration media takes separation technology to a whole new level. No messy carbon bags. No settling tanks full of untreated condensate. No external oil collection containers. Just simple and effective condensate treatment.


nano Sepura oil water separators reliably give you: 


  • 100% performance - even on newer synthetic compressor lubricants* 

  • lower life cycle costs - long media life and simplified maintenance 

  • lower outlet concentrations - down to 5 ppmv or less 

  • space saving - smaller footprint for easier installation 

  • environmentally friendly recycled materials 

  • treatment for systems up to 10,000 scfm with a single unit 

  • peace of mind - the most reliable product of its kind 


The Sepura range of oil water separators are a reliable and cost-effective 

solution to the problem of contaminated condensate. 

Nano Process Chillers


Chilled water is used in a wide range of applications to cool or cure anything from plastic injection molded parts to food ingredients.  Oftentimes, production quality can be increased and time decreased through use of closed loop cooling systems.

The advanced nano C1 industrial process chillers benefit from the experience of a design that has been perfected over 50 years and repeatedly proven through tens of thousands of units in operation around the world. Designed together with industrial users, these chillers have stood the test of time in virtually every industry and application.

The C1 operates in a closed circuit (open circuit optional), offering precise water temperature control and rapid response to changes in ambient and thermal load. This design also eliminates the waste, corrosion and bacterial growth associated with open circuit systems.

In addition, energy efficient and reliable compressors combined with a unique, oversized, patented, NO FROST in-tank evaporator provide the lowest operating costs available on the market today.

Nano Nitrogen Generators


Nitrogen is used in many commercial and industrial applications to improve the quality of a product or process or as a safety measure to prevent combustion. Liquid or bottled nitrogen delivery and storage can be expensive, unreliable and a safety concern. Nitrogen generators allow users to produce nitrogen in-house simply and inexpensively using an existing  compressed air system.


nano recognizes the importance of having a safe, reliable and cost-effective supply of high-purity nitrogen.  We have developed the GEN2 nitrogen generator to meet the increasing demand for high quality complete packaged solutions which save energy and time while fulfilling the needs of their intended application.

A few of the many industries making the switch to nano GEN2 nitrogen generators include:


  • food (MAP)

  • beverage (bottling)

  • plastics (PET)

  • pharmaceutical (product transfer)

  • chemicals (blanketing)

  • laser metal cutting (burring reduction)

  • fire prevention (eliminating combustion)

  • electronics (wave soldering)


Traditional nitrogen generators often require installing and operating an external desiccant dryer. The innovative nano GEN2plus nitrogen generators feature an integrated dryer cartridge which eliminates the need for a pretreatment dryer of any type.  The integrated drying system reduces purge loss by approximately 20% and reduces pressure drop by 10 psi or more which provides significant energy savings over a traditional generator system.

Anest Iwata Logo.jpg
bottom of page